What's new
EuroCCcam Best Cardsharing Exchange Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

How to : Mgcamd + Oscam Canal Digital Conax

Vangerwen

File Master
File Master
Joined
Dec 28, 2012
Messages
345
Reaction score
5
Points
16
Location
Narnia
How to : Mgcamd + Oscam Canal Digital conax

'' Here are working configs for Canal Digital conax using Mgcamd + Oscam for updating entitlements.

The attached files have already been editted so FTP to the correct folders.

Oscam files can be found in folder;

/var/tuxbox/config (Enigma1)
/etc/tuxbox/config (Enigma2)

Mgcamd files can be found in folder;

/var/keys/

mg_cfg


HTML:
# EMM messages 
# 00 don't show any EMMs (default) 
# 01 show only valid EMMs 
# 02 show valid and bad EMMs with complete data display 
M: { 01 } 

# ECM messages 
# 00 don't show anything about ecm 
# 01 normal mode, show pids processed, decoded ecm and cw 
# 02 verbose mode, show valid and bad ECMs with data 
C: { 02 } 

# AU 
# 00 disable, no emm pids processed 
# 01 enable, emm pids always processed for soft-au and shared cards 
# 02 auto, emm started only if channel cant be decoded 
# 03 process emm pids for network cards update only 
A: { 01 } 

# key update (sum 01 or 02 with 04) 
# 01 update only new keys, default setting 
# 02 update all keys (used for valid PMK checking) 
# 04 enable TPS au 
# + tps SID, which pmt pid contains au pid 
U: { 01 } 0x12c0 

# config files folder (softcam, autoroll, ignore/priority) 
# 00 files in /var/keys 
# 01 files in /tmp 
T: { 00 } 

# network mode, use summ for several clients 
# 00 no network (default) 
# 01 newcamd netclient 
# 02 radegast netclient 
# 04 camd3 netclient 
# 08 gbox netclient 
# 32 cccamd netclient, card list saved as /tmp/cccamd.info 
# (ECM only, supported server version up to 2.1.1, later not work) 
G: { 01 } 

# network retry, use summ for several options 
# 00 disable 
# 01 retry every new ecm 
# 02 try to connect to offline shares every Q: seconds 
# 04 try to detect and fast reconnect to lost (and not used atm) server 
# + XX messages number and YY seconds to reconnect 
# mg will reconnect to server, if no answer to last XX ecm/keepalive or 
# if no answer for last ecm or keepalive sent for YY seconds 
# set to 0 to disable 
N: { 07 } 5 30 

# network ecm timeout in seconds 
K: { 05 } 

# newcamd dead routes connect retry, sec 
Q: { 600 } 

# network shares priority 
# 00 gbox, newcamd, cccamd, radegast, camd3 (default) 
# 01 camd3, radegast, cccamd, gbox, newcamd 
# 02 cccamd, newcamd, camd3, gbox, radegast 
P: { 00 } 

# on screen display type 
# 00 No OSD (default) 
# 01 neutrino 
# 02 enigma 
# 03 relook 
# + user password for http auth 
O: { 00 } username password 

# on screen display Options, summ of: 
# 01 show emu ecm 
# 02 show network shares messages 
# 04 show decoding failed / fta 
# 08 show emm keys update 
# + web port to use for osd 
S: { 03 } 80 

# Log option, summ of: 
# 00 off 
# 01 network udp log 
# 02 log to console 
# 04 file, appended ! delete it by yourself, before it eat all your hdd 
# + IP udp-port log-file-name 
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log 

# keep ecm cache, seconds 
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, 
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings. 
E: { 15 } 

# cache option, summ of: 
# 00 Off (default) 
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list 
# 02 Ecm data cache, remember CW for (E:) time 
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart 
H: { 07 } 

# reread files, summ of: 
# 00 No (default) 
# 01 reread config file on channel change (including priority and ignore, but not replace/cache) 
# 02 reread SoftCam.Key on channel change 
# 04 reread SoftCam.Key if file changed 
R: { 04 } 

# debug, summ of 
# 00 off (default) 
# 01 debug ecm 
# 02 debug emm 
# 04 debug network ecm 
# 08 debug network emm 
# 16 debug network login 
# 32 show mem/cpu stats every 1 min 
# 64 add timestamp to log messages 
D: { 00 } 

# box type 
# 00 autodetect, change only if you think wrong type detected. 
# 01 dbox2 
# 02 dreambox 
# 03 triple-dragon 
# 04 relook 
# 05 openbox 
# 06 dreambox/mips 
# 08 stapi/kathrein 
# 09 stapi/ipbox 
# 11 stapi/openbox 
B: { 00 } 

# map all 180x nagra caids to 1801 
# default is 01 
F: { 00 }

newcamd.list


HTML:
CWS_KEEPALIVE = 300 
CWS_INCOMING_PORT = 21000 
CWS = 127.0.0.1 34000 User1Username User1Password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs


Oscam.conf

HTML:
[global] 
nice = -1 
WaitForCards = 1 
ClientTimeout = 5 
CacheDelay = 120 
logfile = /usr/local/etc/oscam.log 

[monitor] 
port = 988 
nocrypt = 
aulow = 120 
hideclient_to = 0 
monlevel = 1 
appendchaninfo = 0 

[newcamd] 
Port = 0B00:000000 
key = 0102030405060708091011121314 
allowed = 
keepalive = 1 
mgclient = 1 


[webif] 
httpport = 8181 
httpuser = oscam 
httppwd = oscam 
httprefresh = 10 
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 
httphideidleclients = 0 
httpreadonly = 0 
httpsavefullcfg = 0


Oscam.server


HTML:
[reader] 
label = Canal Digital 
Protocol = internal 
detect = CD 
device = /dev/sci0 
Group = 2 
EMMCache = 1,3,2 
CAID = 0B00 
ident = 0B00:000000 
oscam.user

Oscam.user

HTML:
[account] 
user = User1Username 
pwd = User1Password 
monlevel = 0 
group = 2 
au = Canal Digital

HTML:
http://www.multiupload.com/5GIRUXAV4O
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock